The GM862-Quad module is the next generation of the GM862 product family continuing Telit’s success in the field of easy-to-integrate GSM/GPRS modules for all industrial m2m applications.
The development focus of the GM862-Quad was on pin-to-pin compatibility to existing GM862 products, while adding quad-band functionality and RoHS compliance. This translates into one consistent product offering for global GSM networks and provides for significant cost advantages with the savings in approvals and logistics costs.
The ruggedized design, extended temperature range, and integrated SIM card holder make the GM862-Quad the ideal platform for medium volume projects. additional features like jamming detection, integrated TCP/IP protocol stack, and Telit's Easy Scan® functionality feature extend capabilities without adding cost.
Product features
- Quad-band EGSM 850 / 900 / 1800 /1900 MHz
- Output power
- Class 4 (2W) @ 850 / 900 MHz - Class 1 (1W) @ 1800 / 1900 MHz
- Control via aT commands according to
GSM 07.05, 07.07 and Telit enhanced
- Supply voltage range: 3.22 – 4.5 V dC
(3.8 V dC recommended)
- Power consumption (typical values)
- Power off: 26 uA - Idle (registered, power saving): 2.6 mA - dedicated mode: 200 mA - GPRS cl.10 (max): 370 mA
- Serial port multiplexer GSM 7.10
- SIM access profile
- Sensitivity:
-107 dBm (typ.) @ 850 / 900 MHz -106 dBm (typ.) @ 1800 / 1900 MHz
- Dimensions: 43.9 x 43.9 x 6.9 mm
- Weight: 19 grams
- Extended temperature range
- 40°C to +85°C (operational) - 40°C to +85°C (storage temperature)
- RoHS compliant
- TCP/IP stack access via AT commands
Interfaces
- 50-pin Molex connector
- 13 I/O ports maximum
- Analog audio (balanced and unbalanced)
- 1 A/D converter
- Buzzer output
- ITu-T V.24 serial link through UART:
- CMOS level - Baud rate from 300 to 115,200 bps - Autobauding from 2,400 to 57,600 bps
- 50 Ohm MMCX antenna connector
- On board SIM card holder, 1.8 V / 3 V with
real-time detection
|
Audio
- Telephony, emergency call
- Half rate, full rate, enhanced full rate and
adaptive multi rate voice codecs (HR, FR, EFR, AMR)
- Superior echo cancellation & noise reduction
- Handset & hands-free operations
- DTMF
Approvals
- Fully type approved conforming with R&TTE directive
- CE, FCC, IC, GCF, PTCRB, anatel
SMS
- Point-to-point mobile originated and mobile terminated SMS
- Concatenated SMS supported
- SMS cell broadcast
- Text and Pdu mode
Circuit switched data transmission
- Asynchronous transparent circuit switched data (CSd) up to 14.4 kbps
- Asynchronous non-transparent CSD up to 9.6 kbps
- V.110
GPRS data
- GPRS class 10
- Mobile station class B
- Coding scheme 1 to 4
- PBCCH support
Fax
|
GSM Supplementary
- Call forwarding
- Call barring
- Call waiting & call hold
- Advice of charge
- Calling line identification presentation (CLIP)
- Calling line identification restriction (CLIR)
- Unstructured supplementary services mobile originated data (USSD)
- Closed user group
Additional features
- SIM phonebook
- Fixed dialing number (FdN)
- Real-time clock
- Alarm management
- Battery management
- Network LED support
- IRA character set
- Jamming detection & report
- Embedded TCP/IP stack, including TCP, IP, udP, SMTP and FTP protocols
- TFMS (Telit Firmware Management Services) Over-the-air update
Telit's EASY Features
- EASy SCAN ® automatic scan over GSM frequencies (with or without SIM card)
|