Telit GC864-QUAD V2 with SIM Holder

Telit GC864-QUAD V2 with SIM Holder

Part no.: GC864Q2H003T000
Manufacturer: Telit

Availability: In Stock

The V2 family is the new generation of Telit modules which offers most of the features of the previous versions plus a GSM/GPRS protocol stack 3GPP Release 4, the Downlink Advance Receiver Performance (DARP) feature for Single Antenna Interference Cancellation (SAIC), the Enhanced Measurement Report, GERAN Feature package 1, which assists in supporting the Extended Uplink TBF and Network Assisted Cell Change (NACC), the control via remote AT Commands and Event Monitor.

The GC864 product family is one of the smallest GSM/GPRS quad-band modules with industrial connectors in the market.With its ultra-compact design and extended temperature range, the Telit GC864-QUAD V2 is the perfect platform for medium-volume m2m applications and mobile data devices. Additional features such as integrated TCP/IP protocol stack and serial multiplexer give extend functionality of the application at no additional cost. The GC864-QUAD V2 makes it furthermore possible to run the customer's application inside the module, thus making it one of the smallest, complete platforms for m2m solutions. This version includes integrated SIM card holder.

Product features

  • Quad-band EGSM 850 / 900 / 1800 / 1900 MHz
  • Output power
    - Class 4 (2W) @ 850 / 900 MHz
    - Class 1 (1W) @ 1800 / 1900 MHz
  • Control via AT commands according to
    3GPP TS 27.005, 27.007 and Telit custom
    AT commands
  • Serial port multiplexer 3GPP TS 27.010
  • SIM access profile
  • SIM application toolkit 3GPP TS 51.014
  • Supply voltage range: 3.22 – 4.5 V DC
    (3.8 V DC recommended)
  • TCP/IP stack access via AT commands
  • Sensitivity:
    -107 dBm (typ.) @ 850 / 900 MHz
    -106 dBm (typ.) @ 1800 / 1900 MHz
  • Power consumption (typical values)
    - Power off: 62 uA
    - Idle (registered, power saving):
    1.5 mA @ DRX=9
    - Dedicated mode:
    ‹ 240 mA @ max power level
    - GPRS cl.10: ‹ 420 mA @ max power level
  • Dimensions: 30 x 36.2 x 3.2 mm
  • Weight: 6.1 grams
  • Extended temperature range
    - 40°C to +85°C (operational)
    - 40°C to +85°C (storage temperature)
  • RoHS compliant
  • DARP/SAIC support


  • 80-pin Molex connector
  • 10 I/O ports maximum
  • Analog audio (balanced)
  • 2 A/D plus 1 D/A converters
  • Buzzer output
  • ITU-T V.24 serial link through UART:
    - CMOS level
    - Baud rate from 300 to 115,200 bps
    - Autobauding up to 115,000 bps
  • 50 Ohm murata GSC antenna
  • SIM card holder


  • Telephony, emergency call
  • Half rate, full rate, enhanced full rate and
    adaptive multi rate voice codecs (HR, FR,
    EFR, AMR)
  • Superior echo cancellation & noise reduction
  • Multiple audio profiles pre-programmed and
    fully configurable by mean AT commands
  • DTMF


  • Fully type approved conforming with R&TTE
  • CE, GCF, FCC, PTCRB, IC, Anatel


  • Point-to-point mobile originated and
    mobile terminated SMS
  • Concatenated SMS supported
  • SMS cell broadcast
  • Text and PDU mode
  • SMS over GPRS

Circuit switched data transmission

  • Asynchronous non-transparent CSD
    up to 9.6 kbps
  • V.110

GPRS data

  • GPRS class 10
  • Mobile station class B
  • Coding scheme 1 to 4
  • PBCCH support
  • GERAN Feature Package 1 support
    (NACC, Extended TBF)

GSM Supplementary

  • Call forwarding
  • Call barring
  • Call waiting & call hold
  • Advice of charge
  • Calling line identification presentation (CLIP)
  • Calling line identification restriction (CLIR)
  • Unstructured supplementary services mobile originated data (USSD)
  • Closed user group

Additional features

  • SIM phonebook
  • SIM card holder
  • Fixed dialing number (FDN)
  • Real-time clock
  • Alarm management
  • Network LED support
  • IRA, GSM, 8859-1 and UCS2 character set
  • Jamming detection
  • Embedded TCP/IP stack, including TCP, IP, UDP, SMTP, ICMP and FTP protocols
  • PFM (Premium FOTA Management) Over-The-Air update service
  • Remote AT commands
  • Event monitor

Python application resources

  • Python* script interpreter (module takes the application code directly in the Python* language)
  • Memory: 1.9 MB of NV memory for the user scripts and 1 MB RAM for the Python* engine usage
  • Over-the-air application SW update
  • Script execution speed increased up to 4 times compared to the GC864-QUAD

Telit's EASY features

  • EASY SCAN ® automatic scan over GSM frequencies (also without SIM card)

Product inquiry form

Telit GC864-QUAD V2 with SIM Holder

Telit GC864-QUAD V2 with SIM Holder

Part no.: GC864Q2H003T000
Manufacturer: Telit

Contant information